EXact X-Rite User's Guide download pdf (Page 89)

X-Rite eXact™ Instrument

Cleaning the Instrument

Your instrument requires very little maintenance to achieve years of reliable operation. However,

to protect your investment and maintain reading accuracy, a few simple-cleaning procedures

should be performed from time to time.

General Cleaning

The exterior of the instrument should only be wiped clean with a cotton cloth dampened (not wet)

in water or isopropyl alcohol. An optional scan chassis would also be cleaned using the same

cleaning procedures.

Cleaning the Touch Display

The touch display should only be wiped clean with a cotton cloth dampened (not wet) in water or

isopropyl alcohol.

Cleaning the Target Window

The target window should only be cleaned with a cotton cloth dampened (not wet) in water.

Cleaning the Optics

The optics should be cleaned once a week in a normal environment. If the instrument is used in a

dirty or dusty environment, more frequent cleaning may be required.

1. Carefully lift the instrument and open the target base.

2. Rotate the reference holder (1) towards the back and hold.

3. Blow short bursts of clean, dry air (2) into the measurement port. This should remove any

accumulated debris from the optics.

4. Carefully return the calibration holder to its normal position.

IMPORTANT: If can air is used for cleaning, do not invert or tilt the can during use. This could

cause damage to the optics.

(1)

(2)

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 103 104

No comments

EXact X-Rite User's Guide Page 89